Automatic Wire Shelving Product Gi Wire Net Making Machine
Guide rail and slider: using Taiwan Yintai, advantages: compared with other manufacturers, square tube, friction coefficient, high positioning accuracy, strong load capacity, wear resistance, smooth movement, low noise. Pull net hook: play a pulling net, unique design to avoid damage to grid and transverse wire, more smooth, driven by the cylinder.
Drailing cable: using ECHU(ichu), double angle shielding, interference prevention, high flexibility, bending resistance, long life.
The induction switch is installed in front and rear to command the travel step and return after detection.
The whole process is driven by the servo motor to drive the gears to work.
| No. | Item Name | Parameter | Note |
| Power condition | Voltage and Frequency | 380V 3phase 50HZ | Intelligent circuit breaker is not suggested the distance to the transformer≦50m |
| Outer voltage range | ±10% |
| Outer transformer | 250KVA |
| Cable specification | 180mm²*3 Pin Cooper wire |
| Air condition | Air compressor | screw type | 0.6-0.8mpa Distance 3m |
| Air production | 3.4m³/min |
| Air tank capacity | 1m³ | Around machine |
| Cooling | Water pool capacity | 1m³ | Clean water for industry |
| Lifting distance ,Water pressure | 0.2-0.3mpa 25-30m Lifting |
Comprising of several groups of wire straightening units, each group has two pairs of straightening wheels inclined in the opposite direction. The unique straightening machine is suitable for straightening steel wire with different diameters, each unit is 5 straightening wheels, each straightening wheel is made of alloy steel and heat treatment and corrosion prevention treatment, overall wear and corrosion resistance, adapted to straightening low-carbon cold wire pulling, galvanized wire, etc.;
Different diameter wires can be well straightened, only need to adjust the spacing between the upper and lower two sets of straightening wheels.
