
Add to Cart
Engineers Available To Service Steel Wire Straightening And Cutting Machine
Pay attention to the extension of the switch when installing the proximity switch to avoid crashing. Generally for the distance from the sensing object about 3 mm.
The external power supply must be cut off before the installation, wiring and other operations; according to the drawing requirements by the professional correct wiring. Otherwise, it will cause electric shock or machine damage.
The equipment must be reliably grounded, otherwise it will cause personnel injury.
No. | Name | Parameters |
1 | Wire diameter | 3.0-6.0mm |
2 | Straightening length | 500-6000mm |
3 | Cutting error | <±1mm |
4 | Straightening speed | 70-120m/min |
5 | Straightness | <2mm/m |
6 | Material | Cold drawn wire,Galvanized wire |
7 | Voltage fluctuation range | ±10% |
8 | Voltage | 380V 50HZ |
Notes to the Steel Wire Straightening And Cutting Machine:
1.The Steel Wire Straightening And Cutting Machine user must do the operation and maintenance in strict accordance with the equipment manual.
2. Prepare the site for Steel Wire Straightening And Cutting Machine installation must be according to the requirements
3. Supply power and gas according to the Steel Wire Straightening And Cutting Machine requirements.
4. Users are required to provide technical staff to assist in the installation, during installation, users need to install the Steel Wire Straightening And Cutting Machine provided free of charge auxiliary equipment.
5. The Steel Wire Straightening And Cutting Machine should be used in the workshop; the work environment will directly affect the performance and service life of the equipment.