Numerical Control 3-6mm Wire Straightening And Cutting Machine
After the Numerical Control 3-6mm Wire Straightening And Cutting Machine sends out and confirms the receipt, fangzheng welding company will send the installation and commissioning personnel to the customer site for installation and commissioning work, at the same time, we will offer free training for machine operators, until the operators has mastered the machine. The after-sale warranty of Numerical Control 3-6mm Wire Straightening And Cutting Machine is one year, Wearing parts and man-made damage are not covered by warranty, after the warranty period, our factory provides lifelong after-sales support, and provide 24-hour phone support, we will give you an answer within eight hours if you have any questions.
| No. | Name | Parameters |
| 1 | Wire diameter | 3.0-6.0mm |
| 2 | Straightening length | 200-3000mm |
| 3 | Cutting error | ＜±1mm |
| 4 | Straightening speed | 60-120m/min |
| 5 | Straightness | ＜2mm/m |
| 6 | Material | Cold drawn wire,Galvanized wire |
| 7 | Voltage fluctuation range | ±10% |
| 8 | Voltage | 380V 50HZ |
Notes to the Numerical Control 3-6mm Wire Straightening And Cutting Machine user:
1.The Numerical Control 3-6mm Wire Straightening And Cutting Machine user must do the operation and maintenance in strict accordance with the equipment manual.
2. Prepare the site for Numerical Control 3-6mm Wire Straightening And Cutting Machine installation must be according to the requirements
3. Supply power and gas according to the Numerical Control 3-6mm Wire Straightening And Cutting Machine requirements.
4. Users are required to provide technical staff to assist in the installation, during installation, users need to install the Numerical Control 3-6mm Wire Straightening And Cutting Machine provided free of charge auxiliary equipment.
5. The Numerical Control 3-6mm Wire Straightening And Cutting Machine should be used in the workshop; the work environment will directly affect the performance and service life of the equipment.
