Construction Automatic 5-12mm Reinforcing Mesh Welding Machine
For better performance of the machine, the following requirements should be noted during the plant site selection and equipment layout:
Surrounding ambient temperature: 5~40 ℃
Relative air humidity: 90% maximum of 20 ℃ and 40 ℃ maximum of 50%;
Elevation shall be less than 2,000 m;
Keep away from large vibrating equipment;
Dust, acid, corrosive gases or substances in the surrounding air shall not exceed the normal content;
Can not be used in the open air, must be used in the factory factory guarding the gate of the factory;
Places away from a strong magnetic field.
Power: AC 380V 50HZ recommends an independent 400KVA transformer with 120 square mm copper wire from the equipment ≤ 50m cable.
Water: provide clean and neutral circulating cooling water, inlet temperature not more than 40 ℃ in summer (reference cooling pool volume not less than 2 cubic meters), pressure 0.2-0.3MPa
Gas: Provide screw air compressor with pressure 0.6-0.8MPa and ≥ 2m3/min.
| Item | Product type | Parameter | Remark |
| 1 | Max. welding capacity | ¢12+12mm | |
| 2 | Long wire diameter | ¢5-12mm | |
| 3 | Cross wire diameter | ¢5-12mm | |
| 4 | Long wire feeding method | In pre-cut | |
| 5 | Cross wire feeding method | In pre-cut | |
| 6 | Long wire spacing | ≥100mm | Mechanically adjustments |
| 7 | Cross wire spacing | ≥100mm | Programming adjustments |
| 8 | Length range of wire mesh | ≤12000mm | Adjustable |
| 9 | Width range of wire mesh | ≤3000mm | Adjustable |
| 10 | Number of welding spot | 29PCS | |
| 11 | Working speed max. | 40-60times/min | |
This device is the core part of Construction Automatic 5-12mm Reinforcing Mesh Welding Machine. It is mainly to weld the meshes at a high speed by cooperating closely with others device.
The welding electrodes head of Construction Automatic 5-12mm Reinforcing Mesh Welding Machine use high-quality materials, which make them more wearable and with better conductive, and also have a long life, reduce production costs.
The improvement of design of welding transformers of Construction Automatic 5-12mm Reinforcing Mesh Welding Machine meets the demand to weld continuously wires of 12+12mm at a high speed at the moment when saving energy.
Construction Automatic 5-12mm Reinforcing Mesh Welding Machine electrodes adopt circulating water cooling, which extends their service lives, and ensures the long-term operation of the equipment.
