6-12mm Holed Mesh For Window Reinforcing Mesh Welding Machine
Including servo fixing device, shearing device; when the mesh needs to open the door window, the system with the long wire grabing mechanism, the shear warp to the required specifications of the mesh warp parameters, can realize the warp length freely adjusted within the parameter range.
The trolley mechanism is composed of straight slider rail and trolley trolley, which is powered by the servo motor and transforms the rotation into straight movement through the precision reducer and gear rack mechanism.Each running distance is changed by adjusting the latitudinal lattice and its number, set according to the actual mesh.At the origin, when receiving the operation signal, the mesh hook is first lifted, any clamp cylinder is clamped, the mesh is positioned, the wire welding is stopped, and the mesh is completed until the whole mesh is welded.When the mesh is at 3 meters, the mesh will be pulled out to the end direction after the welding. After releasing the clamp, the mesh hook will drop, and the car returns to the origin, and the second mesh will be welded.When the cylinder is in reciprocating or long mesh state, when the welding reaches the rear return point, the welding cylinder will not be lifted, directly release the clamp cylinder, and then pull the net cylinder down, and the car returns. When the car returns to the origin and start twice, the welding network welding is incomplete.
| Item | Product type | Parameter | Remark |
| 1 | Max. welding capacity | ¢12+12mm | |
| 2 | Long wire diameter | ¢5-12mm | |
| 3 | Cross wire diameter | ¢5-12mm | |
| 4 | Long wire feeding method | In pre-cut | |
| 5 | Cross wire feeding method | In pre-cut | |
| 6 | Long wire spacing | ≥100mm | Mechanically adjustments |
| 7 | Cross wire spacing | ≥100mm | Programming adjustments |
| 8 | Length range of wire mesh | ≤12000mm | Adjustable |
| 9 | Width range of wire mesh | ≤3000mm | Adjustable |
| 10 | Number of welding spot | 29PCS | |
| 11 | Working speed max. | 40-60times/min | |
This device is the core part of Construction Used High Speed Reinforcing Mesh Welding Machine. It is mainly to weld the meshes at a high speed by cooperating closely with others device.
The welding electrodes head of Construction Used High Speed Reinforcing Mesh Welding Machine use high-quality materials, which make them more wearable and with better conductive, and also have a long life, reduce production costs.
The improvement of design of welding transformers of Construction Used High Speed Reinforcing Mesh Welding Machine meets the demand to weld continuously wires of 12+12mm at a high speed at the moment when saving energy.
Construction Used High Speed Reinforcing Mesh Welding Machine 29 electrodes adopt circulating water cooling, which extends their service lives, and ensures the long-term operation of the equipment.
